| Customization: | Available |
|---|---|
| After-sales Service: | Supplied |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Adopt full hydraulic driving, moving with crawlers itself.
2. Drill head is driven by variable motor with function of two-speed mechanical gear shifts, stepless speed change with an advanced and simple structure.
3. Rotator is fed and driven with a system connecting the spindle and oil cylinder with chain.
4. Mast could be adjusted for its drilling hole with a low center of gravity and good stability.
5. Big torque, powerful driving force, rational and practical design, lower noisy advanced controlling mode, external appearance, a compacted structure, a reliable function, and a flexible operating system.
6. Diesel engine, hydraulic pump, main valves, motors, crawler reducers and key hydraulic spare parts are all adapted famous brands products which are easy to buy and maintenance.
7. Rig provides operator with a nice field of vision and wide and comfortable working condition.
The figures in these tables have been calculated, based on field experiences, and may be reasonably expected.
Actual drilling capacity will depend on in-hold tools and conditions, drilling techniques and equipment used.
Diesel Engine |
Model | 6BTA5.9-C180 (turbocharged and charge water cooled) |
| Displacement | 5.9L(1.56 US Gallons) | |
| Power | 132Kw(180HP) | |
| Rated RPM(Factory setting) | 2200rpm | |
Drilling Capacity |
BQ | 1000m(3280feet) |
| NQ | 700m(2296 feet) | |
| HQ | 500m(1640 feet | |
| PQ | 300m(984 feet) | |
Drill Head |
RPM | Four Shifts/Stepless Change 0-1100 RPM |
| Max.Torque | 4200 N-m(3108Ibf-ft) | |
| Hold Diameter | 98mm(3.85 inch) | |
| Max.Lifting capacity of Spindle | 150 kN(33720 Ibf) | |
| Max.Feeding Powe | 60 kN(13480 Ibf) | |
Primary Pump |
Hydraulic pump Axial Piston variable displacement Triplex pump for driving of rotator,winch mud pump &leveling jacks With load sensing system |
1st Pump:140LPM at 30MPa 2nd Pump:120LPM at 25MPa 3rd Pump:50 LPM at 20MPa |
| Hydraulic Tank | Capacity | 310L(82 US Gallons) |
Capacity of Main Hoist |
Hoisting force (single wire) | 57kN(12814 lbf)(bare drum) |
| Hoisting Speed (single wire) | 38-40m/min (bare drum) | |
| Steel Wire Diameter | 16 mm(0.62 inch) | |
| Steel Wire Length | 50 m(164 feet) | |
Capacity of Wireline Hoist |
Hoisting Force (single wire) | 1200 Kg(2646 Ib)(bare drum) |
| Hoisting Speed (single wire) | 130-400m/min(bare drum) | |
| Steel Wire Diameter | 6 mm(0.23 inch) | |
| Steel Wire Length | 1000 m(3280 feet) | |
Mast |
Mast Height | 9 m(29.52 feet) |
| Mast Adjusting Angle | 0°-90° | |
| Drilling Angle | 45°off horizontal to 90°vertical down | |
| Feed Pull | 15000kg(33075 Ib) | |
| Feed Thrust | 6000kg(13230 Ib) | |
| Rod Pull | 3m or 6m(9.84feet or 19.68feet) | |
| Feeding Stroke | 3500 mm(11.48ft) | |
| Slippage Stroke | 1100 mm(3.6ft) | |
| Mud Pump | Type | Reciprocating pump Triplex Plunger |
| Model | BW160/10 | |
| Foot Clamp | Clamping Scope | 55.5-110 mm(2.19-4.33 inch) through hole φ154mm(6.06 inch) |
Others |
Weight (platform type) | 9300 Kg(20506 lb) |
| Dimensions (L×W×H) | 5100×2200×2450mm (16.73×7.21×8.03ft) |
|
| Transport Way | Crawler |
){kind=link}